Tips For Troubleshooting Your Home Alarm System In Albuquerque
False alarms and system malfunctions can be exasperating, and even worse, could prevent your home’s security from working the way it should. Luckily, most problems, from dead batteries to false alarms, are straightforward to remedy. Check out our suggestions for troubleshooting your home alarm system in Albuquerque. We’ll help keep your household safeguarded and your system running properly.
Test Your Home Security System In Albuquerque
One effective way to troubleshoot your property’s defense is to test it yourself! The latest systems allow you to put them in test mode to prevent you from initiating an emergency response from monitoring agents. After switching to test mode, take these steps:
- Activate your system as you normally would when leaving.
- Open a window or door protected by a contact sensor, or test other equipment. Shut the door or window so it doesn’t trip the alarm when you get out of test mode.
- Permit the alarm to sound for 60 seconds to make sure a message is dispatched to the security provider and an entry is made in the alarm activity log.
- Continue testing equipment as needed
- Inspect the system activity log to validate proper function.
No need to worry, monitoring agents will be able to see that your system is involved in a test. Be sure to turn test mode off when done. It’s a good idea to test once a month or whenever you adjust your home’s phone or internet provider.
Inspect The Placement And Condition Of Motion Detectors
Although an integral part of your alarm system, motion detectors are notorious for false alarms. You can help prevent them with a few simple troubleshooting steps.
- Perform a visual inspection. Is there anything that could shift within the sensor’s detection range, like a curtain blown in a breeze?
- Is the sensor clean? Cobwebs, dirt, and grime can result in poor performance. Make sure the face is clean.
- Does the motion detector come with pet immunity you can activate? Some sensors can be set to disregard pets weighing up to 100 pounds.
- When was the battery last replaced? Low batteries might affect performance or lead to false alarms.
- Is the sensor pointing toward a heat source? Excess heat from sunlight or a fireplace can set off an alarm.
Keep Batteries Ready And Look Out For Low Battery Warnings
One of the great things about new home security systems is that they’ll tell you when batteries are getting low. If your system has a app or control panel, you’ll usually discover alerts there. Depending on the alarm, you might hear an intermittent beep when batteries are getting low.
Contact sensors, motion detectors, smoke detectors, and other wireless tools have batteries that should be replaced every 1 to 2 years. It’s wise to keep batteries ready and establish a replacement schedule. Many systems also come with a rechargeable backup battery for the primary control panel. This battery helps keep your system operating if you lose power and should recharge itself once the electricity is working again. If it fails to recharge, you will need to replace it.
Troubleshooting Is Simple With ADT Home Security In Albuquerque
As the leading name in home security, ADT designs systems that offer unrivaled functionality and convenience. Switching to test mode is easy through the ADT+ app or MyADT.com, and you’ll always receive alerts when a sensor battery is low. Reach out to Secure24 Alarm Systems, an authorized ADT dealer, to get more details and design a system perfect for your Albuquerque home. Call (505) 317-6311 or complete our form today!